Show Mka Session - Cisco Catalyst 3560X-24P Command Reference Manual

show mka session

show mka session
To display a summary of active MACsec Key Agreement (MKA) Protocol sessions, use the show mka
session privileged EXEC command.
Syntax Description interface interface-id
port-id port-id
local-sci sci
detail
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is sample output of the show mka session command:
Switch# show mka session
Total MKA Sessions....... 1
================================================================================
Interface Peer-RxSCI
Catalyst 3750-X and 3560-X Switch Command Reference
2-696
show mka session [interface interface-id] [port-id port-id]] [local-sci sci] [ | {begin | exclude |
include} expression]
(Optional) Displays status information for active MKA sessions on an
interface.
(Optional) Displays a summary of active MKA sessions running on the
interface with the specified port ID. To see the port ID, enter the show mka
session interface interface-id command. Port identifier values begin at 2 and
monotonically increase for each new session that uses a virtual port on the
same physical interface.
(Optional) Displays status information for the MKA session identified by the
Local TX-SCI. To determine the Local TX-SCI for a specific session, enter
the show mka session command without any keywords. The SCI must be 8
octets (16 hexadecimal digits) long.
(Optional) Displays detailed status information about all active MKA
sessions, all sessions on the specified interface, or on the specified interface
with the specified port ID.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Secured Sessions... 1
Pending Sessions... 0
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Policy-Name Audit-Session-ID
OL-21522-02