Show Vlan Filter - Cisco Catalyst 3560X-24P Command Reference Manual

show vlan filter

show vlan filter
Use the show vlan filter privileged EXEC command to display information about all VLAN filters or
about a particular VLAN or VLAN access map.
Note This command is not supported on switches running the LAN base feature set.
Syntax Description access-map name
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vlan filter command:
Switch# show vlan filter
VLAN Map map_1 is filtering VLANs:
20-22
Related Commands Command
show vlan access-map
vlan access-map
vlan filter
Catalyst 3750-X and 3560-X Switch Command Reference
2-774
show vlan filter [access-map name | vlan vlan-id] [ | {begin | exclude | include} expression]
(Optional) Display filtering information for the specified VLAN access map.
(Optional) Display filtering information for the specified VLAN. The range is
1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Description
Displays information about a particular VLAN access map or for all
VLAN access maps.
Creates a VLAN map entry for VLAN packet filtering.
Applies a VLAN map to one or more VLANs.
OL-21522-02