Set - Cisco Catalyst 3560X-24P Command Reference Manual

set

set
Use the set policy-map class configuration command on the switch stack or on a standalone switch to
classify IP traffic by setting a Differentiated Services Code Point (DSCP) or an IP-precedence value in
the packet. Use the no form of this command to remove traffic classification.
Syntax Description
dscp new-dscp
[ip] precedence new-precedence New IP-precedence value assigned to the classified traffic. The
Defaults No traffic classification is defined.
Command Modes
Policy-map class configuration
Command History Release
12.2(53)SE2
Usage Guidelines
If you have used the set ip dscp policy-map class configuration command, the switch changes this
command to set dscp in the switch configuration. If you enter the set ip dscp policy-map class
configuration command, this setting appears as set dscp in the switch configuration.
You can use the set ip precedence policy-map class configuration command or the set precedence
policy-map class configuration command. This setting appears as set ip precedence in the switch
configuration.
The set command is mutually exclusive with the trust policy-map class configuration command within
the same policy map.
For the set dscp new-dscp or the set ip precedence new-precedence command, you can enter a
mnemonic name for a commonly used value. For example, you can enter the set dscp af11 command,
which is the same as entering the set dscp 10 command. You can enter the set ip precedence critical
command, which is the same as entering the set ip precedence 5 command. For a list of supported
mnemonics, enter the set dscp ? or the set ip precedence ? command to see the command-line help
strings.
To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,
use the end command.
Catalyst 3750-X and 3560-X Switch Command Reference
2-500
set {dscp new-dscp | [ip] precedence new-precedence}
no set {dscp new-dscp | [ip] precedence new-precedence}
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
New DSCP value assigned to the classified traffic. The range
is 0 to 63. You also can enter a mnemonic name for a commonly
used value.
range is 0 to 7. You also can enter a mnemonic name for a
commonly used value.
OL-21522-02