Cisco Catalyst 3560X-24P Command Reference Manual page 387

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
This example shows how to specify a range of physical ports to which an interface-level class map in a
hierarchical policy map applies:
Switch(config)# class-map match-all class4
Switch(config-cmap)# match input-interface gigabitethernet2/0/1 - gigabitethernet2/0/5
Switch(config-cmap)# exit
You can verify your settings by entering the show class-map privileged EXEC command.
Related Commands Command
class-map
show class-map
OL-21522-02
Description
Creates a class map to be used for matching packets to the class whose name
you specify.
Displays quality of service (QoS) class maps.
Catalyst 3750-X and 3560-X Switch Command Reference
match (class-map configuration)
2-355