Cisco Catalyst 3560X-24P Command Reference Manual page 777

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
This is an example of output from the show sdm prefer vlan command:
Switch# show sdm prefer vlan
"desktop vlan" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups:
number of IPv4 multicast routes:
number of IPv4 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
This is an example of output from the show sdm prefer command when you have configured a new
template but have not reloaded the switch:
Switch# show sdm prefer
The current template is "desktop routing" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of igmp groups + multicast routes:
number of unicast routes:
number of qos aces:
number of security aces:
On next reload, template will be "desktop vlan" template.
Related Commands Command
sdm prefer
OL-21522-02
number of directly connected hosts:
number of indirect routes:
Description
Sets the SDM template to maximize resources for routing or VLANs or to the
default template, to select a dual IPv4 and IPv6 template, or to select the
desktop templates.
12K
1K
0
0
0
0.5K
1K
3K
1K
11K
3K
8K
0.5K
1K
Catalyst 3750-X and 3560-X Switch Command Reference
show sdm prefer
2-745