Appendix; Catalyst 3750-X And 3560-X Switch Debug Commands - Cisco Catalyst 3560X-24P Command Reference Manual

B
A P P E N D I X
Catalyst 3750-X and 3560-X Switch Debug
Commands
This appendix describes the debug privileged EXEC commands that have been created or changed for
use with the Catalyst 3750-X and 3560-X switch. These commands are helpful in diagnosing and
resolving internetworking problems and should be enabled only under the guidance of Cisco technical
support staff.
Because debugging output is assigned high priority in the CPU process, it can render the system
Caution
unusable. For this reason, use the debug commands only to troubleshoot specific problems or during
troubleshooting sessions with Cisco technical support staff. It is best to use the debug commands during
periods of lower network traffic and fewer users. Debugging during these periods decreases the
likelihood that increased debug command processing overhead will affect system use.
Catalyst 3750-X and 3560-X Switch Command Reference
B-1
OL-21522-02