Show Platform Ip Unicast - Cisco Catalyst 3560X-24P Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform ip unicast

Use the show platform ip unicast privileged EXEC command to display platform-dependent IP unicast
routing information.
This command is not supported on switches running the LAN base feature set.
Note
Syntax Description adjacency
cef-idb
counts
dhcp
failed {adjacency |
arp [A.B.C.D] | route}
loadbalance
mpaths
proxy
route
rpf {A.B.C.D
{A.B.C.D} | stats
interface-id}
standby
statistics
table
trace
| begin
| exclude
| include
expression
OL-21522-02
show platform ip unicast {adjacency | cef-idb | counts | dhcp | failed {adjacency | arp [A.B.C.D]
| route} | loadbalance | mpaths | proxy | route | rpf {A.B.C.D {A.B.C.D} | stats interface-id}
standby | statistics | table | trace} [ | {begin | exclude | include} expression]
Display the platform adjacency database.
Display platform information corresponding to Cisco Express Forwarding
(CEF) interface descriptor block.
Display the current counts for the Layer 3 unicast databases.
Display the DHCP system dynamic addresses.
Display the hardware resource failures. The keywords have these meanings:
• adjacency—Display the adjacency entries that failed to be programmed
in hardware.
• arp—Display the Address Resolution Protocol (ARP) deletions because
of failure and because of retries.
• A.B.C.D—(Optional) Prefix of the ARP entries to display.
• route—Display the route entries that failed to be programmed in
hardware.
Display the platform load-balance database.
Display the Layer 3 unicast routing multipath adjacency database.
Display the platform proxy ARP database.
Display the platform route database.
Display the unicast reverse path forwarding (unicast RPF) platform
information. The keywords have these meanings:
A.B.C.D {A.B.C.D}—Prefix and prefix mask of the RPF entries to
•
display.
stats—Display the unicast RPF statistics for the specified interface.
•
Display the platform standby information.
Display the Layer 3 unicast routing accumulated statistics.
Display the platform IP version 4 (IPv4) information.
Display the platform event trace logs.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform ip unicast
C-13