Cisco Catalyst 3560X-24P Command Reference Manual page 1143
Cisco ios release 12.2(55)se
Hide thumbs
Also See for Catalyst 3560X-24P:
- Technical specifications (6 pages) ,
- Datasheet (29 pages)
Table of Contents
Advertisement
Appendix C
Catalyst 3750-X and 3560-X Show Platform Commands
prog-parser [asic number |
port number [asic number]]
receive {buffer-queue |
port-fifo |
supervisor-sram} [asic
number | port number [asic
number]]
span [vlan-id | asic number] Display the Switched Port Analyzer (SPAN)-related information. The
stack {control | dest-map |
learning | messages | mvid |
prog-parser | span | stats
[asic number | port number
[asic number]]
OL-21522-02
Display the programmable parser tables. The keywords have these
meanings:
asic number—(Optional) Display information for the specified
•
ASIC. The range is 0 to 1.
port number—(Optional) Display information for the specified port
•
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
Display receive information. The keywords have these meanings:
buffer-queue—Display the buffer queue information.
•
port-fifo—Display the port-FIFO information.
•
supervisor-sram—Display the supervisor static RAM (SRAM)
•
information.
asic number—(Optional) Display information for the specified
•
ASIC. The range is 0 to 1.
port number—(Optional) Display information for the specified port
•
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
keywords have these meanings:
•
vlan-id—(Optional) Display information for the specified VLAN.
The range is 0 to 1023.
•
asic number—(Optional) Display information for the specified
ASIC. The range is 0 to 1.
Display stack-related information. The keywords have these meanings:
•
control—Display stack control-status register information.
•
dest-map—Display destination-map information.
learning—Display entries in the learning-cache.
•
messages—Display the stack-message register information.
•
mvid—Display entries in the mapped VLAN-ID table.
•
prog-parser—Display the programmable parser tables.
•
span—Display SPAN-related information.
•
stats—Display raw statistics for the port ASIC.
•
asic number—(Optional) Display information for the specified
•
ASIC. The range is 0 to 1.
port number—(Optional) Display information for the specified port
•
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
These keywords are available only on Catalyst 3750-E switches.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform port-asic
C-31
Advertisement
Table of Contents
