Ip Igmp Snooping - Cisco Catalyst 3560X-24P Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

ip igmp snooping

Use the ip igmp snooping global configuration command on the switch stack or on a standalone switch
to globally enable Internet Group Management Protocol (IGMP) snooping on the switch or to enable it
on a per-VLAN basis. Use the no form of this command to return to the default setting.
Syntax Description
vlan vlan-id
Defaults
IGMP snooping is globally enabled on the switch.
IGMP snooping is enabled on VLAN interfaces.
Command Modes Global configuration
Command History Release
12.2(53)SE2
Usage Guidelines
When IGMP snooping is enabled globally, it is enabled in all the existing VLAN interfaces. When IGMP
snooping is globally disabled, it is disabled on all the existing VLAN interfaces.
VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs and cannot be used in IGMP
snooping.
Examples
This example shows how to globally enable IGMP snooping:
Switch(config)# ip igmp snooping
This example shows how to enable IGMP snooping on VLAN 1:
Switch(config)# ip igmp snooping vlan 1
You can verify your settings by entering the show ip igmp snooping privileged EXEC command.
Related Commands Command
ip igmp snooping report-suppression
show ip igmp snooping
show ip igmp snooping groups
OL-21522-02
ip igmp snooping [vlan vlan-id]
no ip igmp snooping [vlan vlan-id]
(Optional) Enable IGMP snooping on the specified VLAN. The range is 1 to
1001 and 1006 to 4094.
Modification
This command was introduced.
Description
Enables IGMP report suppression.
Displays the snooping configuration.
Displays IGMP snooping multicast information.
Catalyst 3750-X and 3560-X Switch Command Reference
ip igmp snooping
2-261