Cisco Catalyst 3560X-24P Command Reference Manual page 825

Cisco ios release 12.2(55)se
Hide thumbs Also See for Catalyst 3560X-24P:
Table of Contents

Advertisement

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
notification-type
Note
Though visible in the command-line help strings, the fru-ctrl keyword is not supported on Catalyst
3560-X switches.
OL-21522-02
(Optional) Type of notification to be sent to the host. If no type is specified,
all notifications are sent. The notification type can be one or more of the
these keywords:
bgp—Send Border Gateway Protocol (BGP) state change traps. This
keyword is available only when the IP services feature set is enabled on
the switch or the stack master.
bridge—Send SNMP Spanning Tree Protocol (STP) bridge MIB traps.
cluster—Send cluster member status traps.
config—Send SNMP configuration traps.
copy-config—Send SNMP copy configuration traps.
cpu threshold—Allow CPU-related traps.
entity— Send SNMP entity traps.
envmon—Send environmental monitor traps.
flash—Send SNMP FLASH notifications.
fru-ctrl—Send entity FRU control traps. In the switch stack, this trap
refers to the insertion or removal of a switch in the stack.
hsrp—Send SNMP Hot Standby Router Protocol (HSRP) traps.
ipmulticast—Send SNMP IP multicast routing traps.
mac-notification—Send SNMP MAC notification traps.
msdp—Send SNMP Multicast Source Discovery Protocol (MSDP)
traps.
ospf—Send Open Shortest Path First (OSPF) traps.
pim—Send SNMP Protocol-Independent Multicast (PIM) traps.
port-security—Send SNMP port-security traps.
rtr—Send SNMP Response Time Reporter traps.
snmp—Send SNMP-type traps.
storm-control—Send SNMP storm-control traps.
stpx—Send SNMP STP extended MIB traps.
syslog—Send SNMP syslog traps.
tty—Send TCP connection traps.
udp-port port—Configure the User Datagram Protocol (UDP) port
number of the host to receive the traps. The range is from 0 to 65535.
vlan-membership— Send SNMP VLAN membership traps.
vlancreate—Send SNMP VLAN-created traps.
vlandelete—Send SNMP VLAN-deleted traps.
vtp—Send SNMP VLAN Trunking Protocol (VTP) traps.
Catalyst 3750-X and 3560-X Switch Command Reference
snmp-server host
2-793

Advertisement

Table of Contents
loading

Table of Contents