Show Platform Backup Interface - Cisco Catalyst 3560X-24P Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform backup interface

Use the show platform backup interface privileged EXEC command to display platform-dependent
backup information used in a Flex Links configuration.
Syntax Description interface-id
dummyQ
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-21522-02
show platform backup interface [interface-id | dummyQ] [ | {begin | exclude | include}
expression]
(Optional) Display backup information for all interfaces or the specified
interface. The interface can be a physical interface or a port channel.
(Optional) Display dummy queue information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform backup interface
C-3