Debug Platform Cisp - Cisco Catalyst 3560X-24P Command Reference Manual

debug platform cisp

debug platform cisp
Use the debug platform cisp global configuration command to enable platform-level debugging of a
switch that has one or more Client Information Signalling Protocol (CISP)-enabled interfaces. Use the
no form of this command to disable debugging.
Syntax Description
initialization
interface-configuration
rpc
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, start a session from the stack master by using the session switch-number
privileged EXEC command and enter the debug command at the command-line prompt of the stack
member. You also can use the remote command stack-member-number <line> privileged EXEC
command on the stack master switch to enable debugging on a member switch without first starting a
session.
Related Commands Command
cisp enable
dot1x credentials (global
show cisp
Catalyst 3750-X and 3560-X Switch Command Reference
B-38
debug platform cisp [initialization | interface-configuration | rpc]
no debug platform cisp [initialization | interface-configuration | rpc]
Modification
This command was introduced.
configuration)profile Configures a profile on a supplicant switch.
Appendix B
Enable debugging of the CISP initialization sequence.
Enable debugging of the CISP configuration.
Enable debugging of the CISP RPC requests.
Description
Enables Client Information Signalling Protocol
(CISP)
Displays CISP information for a specified
interface.
Catalyst 3750-X and 3560-X Switch Debug Commands
OL-21522-02