Debug Platform Ip Unicast - Cisco Catalyst 3560X-24P Command Reference Manual

Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands

debug platform ip unicast

Use the debug platform ip unicast privileged EXEC command to enable debugging of
platform-dependent IP unicast routing. Use the no form of this command to disable debugging.
Syntax Description adjacency
all
arp
dhcp
errors
events
interface
mpath
registries
retry
route
rpc
rpf
standby
statistics
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
OL-21522-02
debug platform ip unicast {adjacency | all | arp | dhcp | errors | events | interface | mpath |
registries | retry | route | rpc | rpf | standby | statistics}
no debug platform ip unicast {adjacency | all | arp | dhcp | errors | events | interface | mpath |
registries | retry | route | rpc | rpf | standby | statistics}
Display IP unicast routing adjacency programming event debug messages.
Display all platform IP unicast routing debug messages.
Note Using this command can degrade the performance of the switch.
Display IP unicast routing Address Resolution Protocol (ARP) and ARP throttling debug
messages.
Display IP unicast routing DHCP dynamic address-related event debug messages.
Display all IP unicast routing error debug messages, including resource allocation
failures.
Display all IP unicast routing event debug messages, including registry and
miscellaneous events.
Display IP unicast routing interface event debug messages.
Display IP unicast routing multi-path adjacency programming event debug messages
(present when performing equal or unequal cost routing).
Display IP unicast routing forwarding information database (FIB), adjacency add,
update, and delete registry event debug messages.
Display IP unicast routing reprogram FIBs with hardware memory allocation failure
debug messages.
Display IP unicast routing FIB hardware programming event debug messages.
Display IP unicast routing Layer 3 unicast remote procedure call (RPC) interaction
debug messages.
Display IP unicast routing Layer 3 unicast reverse path forwarding (unicast RPF) event
debug messages.
Display IP unicast routing standby event debug messages, helpful in troubleshooting Hot
Standby Routing Protocol (HSRP) issues.
Display IP unicast routing statistics gathering-related event debug messages.
Catalyst 3750-X and 3560-X Switch Command Reference
debug platform ip unicast
B-55