Cisco Catalyst 3560X-24P Command Reference Manual page 803

Cisco ios release 12.2(55)se

Hide thumbs Also See for Catalyst 3560X-24P:

Table of Contents

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

This is an example of output from the show vlan private-vlan type command:

Switch> show vlan private-vlan type

---- -----------------

This is an example of output from the show vlan summary command:

Switch> show vlan summary

Number of existing VLANs

Number of existing VTP VLANs

Number of existing extended VLANs : 0

This is an example of output from the show vlan id command.

Switch# show vlan id 2

---- -------------------------------- --------- -------------------------------

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

Remote SPAN VLAN

----------------

This is an example of output from the show vlan internal usage command. It shows that VLANs 1025

and 1026 are being used as internal VLANs for Gigabit Ethernet routed ports 23 and 24 on stack

member 1. If you want to use one of these VLAN IDs, you must first shut down the routed port, which

releases the internal VLAN, and then create the extended-range VLAN. When you start up the routed

port, another internal VLAN number is assigned to it.

Switch> show vlan internal usage

---- -------------

1025 GigabitEthernet1/0/23

1026 GigabitEthernet1/0/24

non-operational

Gi1/0/13, Gi1/0/20, Gi1/0/22, Gi1/0/1, Gi2/0/13,

Gi2/0/22, Gi3/0/13, Gi3/0/14, Gi3/0/20, Gi3/0/1

Gi1/0/13, Gi1/0/20, Gi1/0/21, Gi1/0/1, Gi2/0/13,

Gi2/0/20, Gi3/0/14, Gi3/0/20, Gi3/0/21, Gi3/0/1

Gi1/0/13, Gi1/0/20, Gi1/0/23, Gi1/0/33. Gi1/0/1,

Gi2/0/13, Gi3/0/14, Gi3/0/20. Gi3/0/23, Gi3/0/33,

Gi1/0/5, Gi1/0/10, Gi2/0/5, Gi2/0/10, Gi2/0/15

Gi1/0/7, Gi1/0/8

Gi2/0/1, Gi2/0/2

Parent RingNo BridgeNo Stp

Catalyst 3750-X and 3560-X Switch Command Reference

BrdgMode Trans1 Trans2