Cisco Catalyst 3560X-24P Command Reference Manual page 497

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
This example shows how to disable the egress expedite queue after the SRR shaped and shared weights
are configured. The shaped mode overrides the shared mode.
Switch(config)# interface gigabitethernet1/0/2
Switch(config-if)# srr-queue bandwidth shape 25 0 0 0
Switch(config-if)# srr-queue bandwidth share 30 20 25 25
Switch(config-if)# no priority-queue out
You can verify your settings by entering the show mls qos interface interface-id queueing or the show
running-config privileged EXEC command.
Related Commands Command
show mls qos interface
srr-queue bandwidth shape
srr-queue bandwidth share
OL-21522-02
Description
queueing Displays the queueing strategy (SRR, priority queueing), the
weights corresponding to the queues, and the
CoS-to-egress-queue map.
Assigns the shaped weights and enables bandwidth shaping on
the four egress queues mapped to a port.
Assigns the shared weights and enables bandwidth sharing on
the four egress queues mapped to a port.
Catalyst 3750-X and 3560-X Switch Command Reference
priority-queue
2-465