Cisco Catalyst 3560X-24P Command Reference Manual page 458

pagp learn-method
Examples This example shows how to set the learning method to learn the address on the physical port within the
EtherChannel:
Switch(config-if)# pagp learn-method physical-port
This example shows how to set the learning method to learn the address on the port-channel within the
EtherChannel:
Switch(config-if)# pagp learn-method aggregation-port
You can verify your settings by entering the show running-config privileged EXEC command or the
show pagp channel-group-number internal privileged EXEC command.
Related Commands Command
pagp port-priority
show pagp
show running-config
Catalyst 3750-X and 3560-X Switch Command Reference
2-426
Chapter 2
Description
Selects a port over which all traffic through the EtherChannel is sent.
Displays PAgP channel-group information.
Displays the operating configuration. For syntax information, use this link to
the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_
reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate to
the command.
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02