Cisco Catalyst 3560X-24P Command Reference Manual page 604

show env
Usage Guidelines Use the show env user EXEC command to display the information for the switch being accessed—a
standalone switch or the stack master. Use this command with the stack and switch keywords to display
all information for the stack or for the specified stack member.
If you enter the show env temperature status command, the command output shows the switch
temperature state and the threshold level.
You can also use the show env temperature command to display the switch temperature status. The
command output shows the green and yellow states as OK and the red state as FAULTY. If you enter the
show env all command, the command output is the same as the show env temperature status command
output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output from the show env all command on a standalone switch:
Switch #show env all
FAN 1 is OK
FAN 2 is OK
FAN PS-1 is OK
FAN PS-2 is OK
TEMPERATURE is OK
Temperature Value: 27 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 49 Degree Celsius
Red Threshold
SW
--
1A
1B
2A
2B
3A
3B
SW
--
1
2
3
This is an example of output from the show env fan command:
Switch> show env fan
FAN 1 is OK
FAN 2 is OK
This is an example of output from the show env power all command on a stack master:
Switch #show env power all
SW
--
1A
1B
2A
2B
3A
3B
Catalyst 3750-X and 3560-X Switch Command Reference
2-572
: 59 Degree Celsius
PID Serial#
------------------ ----------
NG3K-PWR-715WAC LIT133705CV
NG3K-PWR-1100WAC LIT1337056X
C3KX-PWR-350WAC DTN1342L00Y
C3KX-PWR-715WAC DTN1341K01W
Not Present
C3KX-PWR-715WAC DTN1341K01T
Status RPS Name
------------- ----------------
Active <>
Active <>
Active <>
PID Serial#
------------------ ----------
NG3K-PWR-715WAC LIT133705CV
NG3K-PWR-1100WAC LIT1337056X
C3KX-PWR-350WAC DTN1342L00Y
C3KX-PWR-715WAC DTN1341K01W
Not Present
C3KX-PWR-715WAC DTN1341K01T
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Status Sys Pwr
--------------- -------
OK Good
OK Good
OK Good
OK Good
OK Good
RPS Serial# RPS Port#
----------- ---------
Status Sys Pwr
--------------- -------
OK Good
OK Good
OK Good
OK Good
OK Good
PoE Pwr Watts
------- -----
Good 715/0
Good 1100/0
Good 350/0
Good 715/0
Good 715/0
PoE Pwr Watts
------- -----
Good 715/0
Good 1100/0
Good 350/0
Good 715/0
Good 715/0
OL-21522-02