Debug Platform Pm - Cisco Catalyst 3560X-24P Command Reference Manual

debug platform pm

debug platform pm
Use the debug platform pm privileged EXEC command to enable debugging of the platform-dependent
port manager software module. Use the no form of this command to disable debugging.
Syntax Description
all
counters
errdisable
etherchnl
exceptions
hpm-events
idb-events
if-numbers
ios-events
link-status
platform
pm-events
pm-span
pm-vectors [detail]
rpc [general |
oper-info | state |
vectors | vp-events]
soutput-vectors
stack-manager
Catalyst 3750-X and 3560-X Switch Command Reference
B-64
debug platform pm {all | counters | errdisable | etherchnl | exceptions | hpm-events | idb-events
| if-numbers | ios-events | link-status | platform | pm-events | pm-span | pm-vectors [detail]
| rpc [general | oper-info | state | vectors | vp-events] | soutput-vectors | stack-manager | sync
| vlans}
no debug platform pm {all | counters | errdisable | etherchnl | exceptions | hpm-events |
idb-events | if-numbers | ios-events | link-status | platform | pm-events | pm-span |
pm-vectors [detail] | rpc [general | oper-info | state | vectors | vp-events] | soutput-vectors |
stack-manager | sync | vlans}
Display all port-manager debug messages.
Display counters for remote procedure call (RPC) debug messages.
Display error-disabled related-events debug messages.
Display EtherChannel related-events debug messages.
Display system exception debug messages.
Display platform port-manager event debug messages.
Display interface descriptor block (IDB) related-events debug messages.
Display interface-number translation-event debug messages.
Display Cisco IOS event debug messages.
Display interface link-detection event debug messages.
Display port-manager function-event debug messages.
Display port manager event debug messages.
Display port manager Switched Port Analyzer (SPAN) event debug messages.
Display port-manager vector-related-event debug messages. The keyword has
this meaning:
detail—Display vector-function details.
•
Display RPC related-event debug messages. The keywords have these
meanings:
general—(Optional) Display RPC general events.
•
oper-info—(Optional) Display operational- and informational-related
•
RPC messages.
state—(Optional) Display administrative- and operational-related RPC
•
messages.
vectors—(Optional) Display vector-related RPC messages.
•
vp-events—(Optional) Display virtual ports related-events RP messages.
•
Display IDB output vector event debug messages.
Display stack-manager related-events debug messages.
This keyword is supported only on Catalyst 3750-X switches.
Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands
OL-21522-02