Show Platform Stack Manager - Cisco Catalyst 3560X-24P Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform stack manager

Use the show platform stack manager privileged EXEC command to display platform-dependent
switch-stack information.
This command is supported only on Catalyst 3750-X switches.
Note
Syntax Description all
counters
trace [sdp [reverse]]
trace [state [reverse]]
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-21522-02
show platform stack manager {all | counters | trace [sdp [reverse] | state [reverse]]}
[ | {begin | exclude | include} expression]
Display all information for the entire switch stack.
Display the stack manager counters.
Display trace information. The keywords have these meanings:
•
•
Display trace information. The keywords have these meanings:
•
•
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
sdp—(Optional) Display Stack Discovery Protocol (SDP) information.
reverse—(Optional) Display trace information in reverse chronological
order (from recent to older chronological sequence).
state—(Optional) Display stack state machine information.
reverse—(Optional) Display trace information in reverse chronological
order (from recent to older chronological sequence).
Catalyst 3750-X and 3560-X Switch Command Reference
show platform stack manager
C-41