Ip Dhcp Snooping Trust - Cisco Catalyst 3560X-24P Command Reference Manual

ip dhcp snooping trust

ip dhcp snooping trust
Use the ip dhcp snooping trust interface configuration command on the switch stack or on a standalone
switch to configure a port as trusted for DHCP snooping purposes. Use the no form of this command to
return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults
DHCP snooping trust is disabled.
Command Modes Interface configuration
Command History Release
12.2(53)SE2
Usage Guidelines Configure as trusted ports those that are connected to a DHCP server or to other switches or routers.
Configure as untrusted ports those that are connected to DHCP clients.
Examples This example shows how to enable DHCP snooping trust on a port:
Switch(config-if)# ip dhcp snooping trust
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping binding
Catalyst 3750-X and 3560-X Switch Command Reference
2-250
ip dhcp snooping trust
no ip dhcp snooping trust
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
OL-21522-02