Show Ipv6 Mld Snooping Mrouter - Cisco Catalyst 3560X-24P Command Reference Manual

Cisco ios release 12.2(55)se
Hide thumbs Also See for Catalyst 3560X-24P:
Table of Contents

Advertisement

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show ipv6 mld snooping mrouter

Use the show ipv6 mld snooping mrouter user EXEC command to display dynamically learned and
manually configured IP version 6 (IPv6) Multicast Listener Discovery (MLD) router ports for the switch
or a VLAN.
Syntax Description
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(53)SE2
Usage Guidelines
Use this command to display MLD snooping router ports for the switch or for a specific VLAN.
VLAN numbers 1002 through 1005 are reserved for Token Ring and FDDI VLANs and cannot be used
in MLD snooping.
To configure the dual IPv4 and IPv6 template, enter the sdm prefer dual-ipv4-and-ipv6 {default | vlan)
global configuration command and reload the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show ipv6 mld snooping mrouter command. It displays snooping
characteristics for all VLANs on the switch that are participating in MLD snooping.
Switch> show ipv6 mld snooping mrouter
Vlan
----
2
72
200
This is an example of output from the show ipv6 mld snooping mrouter vlan command. It shows
multicast router ports for a specific VLAN.
Switch> show ipv6 mld snooping mrouter vlan 100
Vlan
----
2
OL-21522-02
show ipv6 mld snooping mrouter [vlan vlan-id] [ | {begin | exclude | include} expression]
(Optional) Specify a VLAN; the range is 1 to 1001 and 1006 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
ports
-----
Gi1/0/11(dynamic)
Gi1/0/11(dynamic)
Gi1/0/11(dynamic)
ports
-----
Gi1/0/11(dynamic)
Catalyst 3750-X and 3560-X Switch Command Reference
show ipv6 mld snooping mrouter
2-643

Advertisement

Table of Contents
loading

Table of Contents