Mls Qos Srr-Queue Output Cos-Map - Cisco Catalyst 3560X-24P Command Reference Manual

mls qos srr-queue output cos-map

mls qos srr-queue output cos-map
Use the mls qos srr-queue output cos-map global configuration command on the switch stack or on a
standalone switch to map class of service (CoS) values to an egress queue or to map CoS values to a
queue and to a threshold ID. Use the no form of this command to return to the default setting.
Syntax Description queue queue-id
cos1...cos8
threshold threshold-id
cos1...cos8
Defaults Table 2-20
Table 2-20
CoS Value
0, 1
2, 3
4
5
6, 7
Command Modes Global configuration
Command History Release
12.2(53)SE2
Catalyst 3750-X and 3560-X Switch Command Reference
2-394
mls qos srr-queue output cos-map queue queue-id {cos1...cos8 | threshold threshold-id
cos1...cos8}
no mls qos srr-queue output cos-map
Specify a queue number.
For queue-id, the range is 1 to 4.
Map CoS values to an egress queue.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
Map CoS values to a queue threshold ID.
For threshold-id, the range is 1 to 3.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
shows the default CoS output queue threshold map:
Default Cos Output Queue Threshold Map
Queue ID–Threshold ID
2–1
3–1
4–1
1–1
4–1
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02