Cisco Catalyst 3560X-24P Command Reference Manual page 489

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Examples This example shows how to enable policing of the power consumption and configuring the switch to
generate a syslog message on the PoE port on a switch:
Switch(config)# interface gigabitethernet1/0/2
Switch(config-if)# power inline police action log
You can verify your settings by entering the show power inline police privileged EXEC command.
Related Commands Command
errdisable detect
cause
errdisable recovery
cause inline-power
power inline
power inline
consumption
show power inline
police
OL-21522-02
Description
Enables error-disabled detection for the PoE cause.
inline-power
Configures the PoE recovery mechanism variables.
Configures the power management mode on PoE ports.
Overrides the amount of power specified by the IEEE classification for the
powered device.
Displays the power policing information about the real-time power
consumption.
Catalyst 3750-X and 3560-X Switch Command Reference
power inline police
2-457