Cisco Catalyst 3560X-24P Command Reference Manual page 655

Cisco ios release 12.2(55)se

Hide thumbs Also See for Catalyst 3560X-24P:

Table of Contents

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

This is an example of output from the show ip igmp snooping groups command without any keywords.

It displays the multicast table for the switch.

Switch# show ip igmp snooping groups

-------------------------------------------------------------

This is an example of output from the show ip igmp snooping groups count command. It displays the

total number of multicast groups on the switch.

Switch# show ip igmp snooping groups count

Total number of multicast groups: 2

This is an example of output from the show ip igmp snooping groups dynamic command. It shows

only the entries learned by IGMP snooping.

Switch# show ip igmp snooping groups vlan 1 dynamic

-------------------------------------------------------------

This is an example of output from the show ip igmp snooping groups vlan vlan-id ip-address

command. It shows the entries for the group with the specified IP address.

Switch# show ip igmp snooping groups vlan 104 224.1.4.2

-------------------------------------------------------------

Related Commands

ip igmp snooping

ip igmp snooping vlan mrouter

ip igmp snooping vlan static

show ip igmp snooping

show ip igmp snooping mrouter

Gi2/0/1, Gi2/0/2

Gi2/0/1, Gi1/0/15

Gi2/0/1, Gi1/0/15

Enables IGMP snooping on the switch or on a VLAN.

Configures a multicast router port.

Statically adds a Layer 2 port as a member of a multicast group.

Displays the IGMP snooping configuration of the switch or the

Displays IGMP snooping multicast router ports for the switch or

for the specified multicast VLAN.

Catalyst 3750-X and 3560-X Switch Command Reference

show ip igmp snooping groups