Cisco Catalyst 3560X-24P Command Reference Manual page 887

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
•
•
•
Examples This example removes switch 2, which is connected to the power stack, from the power pool and shutting
down both power ports.
Switch(config)# stack-power switch 2
Switch(config-switch-stackpower)# standalone
Switch(config-switch-stackpower)# exit
Related Commands Command
power inline
power-priority
show stack-power
OL-21522-02
power-priority: sets the power priority for the switch and the switch ports. See the
command.
stack-id name: enter the name of the power stack to which the switch belongs. If you do not enter
the power stack-ID, the switch does not inherit the stack parameters. The name can be up to 31
characters.
standalone: Forces the switch to operate in standalone power mode. This mode shuts down both
stack power ports.
Description
Configures the power management mode for the specified PoE port or for all
PoE ports.
Sets the power priority for the switch and the switch ports.
Displays parameters of the power stack.
Catalyst 3750-X and 3560-X Switch Command Reference
stack-power
power-priority
2-855