Show Platform Pm - Cisco Catalyst 3560X-24P Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform pm

Use the show platform pm privileged EXEC command to display platform-dependent port-manager
information.
Syntax Description counters
group-masks
idbs {active-idbs |
deleted-idbs}
if-numbers
link-status
platform-block
port-info interface-id
stack-view
vlan {info | line-state}
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the stack-view keyword is not supported on switches
Note
running the LAN base feature set.
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
OL-21522-02
show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers |
link-status | platform-block | port-info interface-id | stack-view | vlan {info | line-state}
[ | {begin | exclude | include} expression]
Display module counters information.
Display EtherChannel group masks information.
Display interface data block (IDB) information. The keywords have these
meanings:
•
•
Display interface numbers information.
Display local port link status information.
Display platform port block information.
Display port administrative and operation fields for the specified interface.
Display status information for the stack.
This keyword is available only on Catalyst 3750-X switches.
Display platform VLAN information. The keywords have these meanings:
•
•
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
active-idbs—Display active IDB information.
deleted-idbs—Display deleted and leaked IDB information.
info—Display information for active VLANs.
line-state—Display line-state information.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform pm
C-27