Setting The System Units - Endress+Hauser Proline Prosonic Flow I 400 Operating Instructions Manual

Proline Prosonic Flow I 400 Modbus RS485
Parameter
Device tag
Parameter
Volume flow unit
Volume unit
Endress+Hauser
Device reset (0000)
Parameter overview with brief description
Description
Enter the name for the measuring point.
10.4.1

Setting the system units

In the System units submenu the units of all the measured values can be set.
Navigation
"Setup" menu → System units
‣
System units
Volume flow unit (0553)
Volume unit (0563)
Mass flow unit (0554)
Mass unit (0574)
Velocity unit (0566)
Temperature unit (0557)
Density unit (0555)
Length unit (0551)
Parameter overview with brief description
Description
Select volume flow unit.
Result
The selected unit applies to:
• Output
• Low flow cut off
• Simulation process variable
Select volume unit.
Operating time (0652)
Reset access code (0024)
Character string comprising numbers, letters
and special characters (32)
Selection
Unit choose list
Unit choose list
Commissioning
→  112
→  112
→  112
User entry
→  81
→  81
→  82
→  82
→  82
→  82
→  82
→  82
Factory setting
Country-specific:
• m³/h
• ft³/min
Country-specific:
• m³
• ft³
81