Simulation - Endress+Hauser Proline Prosonic Flow I 400 Operating Instructions Manual

Commissioning
Parameter
Define access code
Confirm access code
Parameter
Operating time
Reset access code
Parameter
Device reset
* Visibility depends on order options or device settings
112
Parameter overview with brief description
Description
Specify an access code that is required to obtain the access
rights for the Maintenance role.
Confirm the access code entered for the Maintenance role.
Using the parameter to reset the access code
Navigation
"Setup" menu → Advanced setup → Administration → Reset access code
‣
Reset access code
Operating time
Reset access code
Parameter overview with brief description
Description
Indicates how long the device has been in operation.
Enter the code provided by Endress+Hauser Technical Support
to reset the Maintenance code.

For a reset code, contact your Endress+Hauser service
organization.
The reset code can only be entered via:
• Web browser
• DeviceCare, FieldCare (via CDI-RJ45 service interface)
• Fieldbus
Using the parameter to reset the device
Navigation
"Setup" menu → Advanced setup → Administration
Parameter overview with brief description
Description
Reset the device configuration - either entirely or in part - to a
defined state.
10.6

Simulation

Via the Simulation submenu, it is possible to simulate various process variables in the
process and the device alarm mode and verify downstream signal chains (switching valves
Proline Prosonic Flow I 400 Modbus RS485
User entry
Max. 16-digit character string comprising
numbers, letters and special characters
Max. 16-digit character string comprising
numbers, letters and special characters
User interface / User entry
Days (d), hours (h), minutes (m) and seconds
(s)
Character string comprising numbers, letters
and special characters
Selection
• Cancel
• To delivery settings
• Restart device
• Restore S-DAT backup
→  112
→  112
*
Endress+Hauser