Navigating And Selecting From List; Calling The Parameter Directly - Endress+Hauser Proline Prosonic Flow I 400 Operating Instructions Manual

Operation options
52
8.3.6

Navigating and selecting from list

Different operating elements are used to navigate through the operating menu. The
navigation path is displayed on the left in the header. Icons are displayed in front of the
individual menus. These icons are also shown in the header during navigation.
For an explanation of the navigation view with symbols and operating elements
→  47
Example: Setting the number of displayed measured values to "2 values"
X X X X X X X X X
20.50
Main menu
Language
1.
Display/operat.
Setup
Main menu
Language
2.
Display/operat.
Setup
3.
4.
5.
6.
7.
8.
8.3.7

Calling the parameter directly

A parameter number is assigned to every parameter to be able to access a parameter
directly via the onsite display. Entering this access code in the Direct access parameter
calls up the desired parameter directly.
Navigation path
Expert → Direct access
Proline Prosonic Flow I 400 Modbus RS485
0104-1
English
0091-1
/ ../Display/operat.
Access stat.disp
Operator
Locking status
Display
/ ../Display/operat.
Locking status
Display
/ ../Display
Format display
Contrast display
Display intervall
/ ../Format display
1 value, max.
Bargr. + 1 value
2 values
Val. large+2val.
2 s
0098-1
1 value, max.
0098-1
0098-1
/ ../Format display
1 value, max.
Bargr. + 1 value
2 values
Val. large+2val.
X X X X X X X X X
Endress+Hauser
10.50
mA
2800
Hz
A0029562-EN