Requirements - Endress+Hauser Proline Prosonic Flow I 400 Operating Instructions Manual

Proline Prosonic Flow I 400 Modbus RS485
Endress+Hauser
8.4.2

Requirements

Computer hardware
Hardware
Interface
Connection
Screen
1) Recommended cable: CAT5e, CAT6 or CAT7, with shielded plug (e.g. YAMAICHI product; part no. Y-
ConProfixPlug63/Prod. ID: 82-006660)
Computer software
Software
Recommended operating
systems
Web browsers supported
Computer settings
Settings
User rights
Proxy server settings of the
web browser
JavaScript
Network connections
In the event of connection problems: →  126
Interface
CDI-RJ45
The computer must have a RJ45
1)
interface.
Standard Ethernet cable
Recommended size: ≥12" (depends on the screen resolution)
Interface
CDI-RJ45
• Microsoft Windows 8 or higher.
• Mobile operating systems:
• iOS
• Android

Microsoft Windows XP and Windows 7 is supported.
• Microsoft Internet Explorer 8 or higher
• Microsoft Edge
• Mozilla Firefox
• Google Chrome
• Safari
Interface
CDI-RJ45
Appropriate user rights (e.g. administrator rights) for TCP/IP and proxy server
settings are necessary (e.g. for adjusting the IP address, subnet mask etc.).
The web browser setting Use a proxy server for your LAN must be disabled .
JavaScript must be enabled.

If JavaScript cannot be enabled:
Enter http://192.168.1.212/servlet/
basic.html in the address bar of the web
browser. A fully functional but simplified
version of the operating menu structure
starts in the web browser.

When installing a new firmware version:
To enable correct data display, clear the
temporary memory (cache) under
Internet options in the web browser.
Only use the active network connections to the measuring device.
Switch off all other network connections such
as WLAN for example.
Operation options
WLAN
The operating unit must have a WLAN
interface.
Connection via Wireless LAN.
WLAN
WLAN
JavaScript must be enabled.

The WLAN display
requires JavaScript
support.
Switch off all other network
connections.
57