Endress+Hauser Proline Prosonic Flow I 400 Operating Instructions Manual page 100

Commissioning
Parameter
Format display
Value 1 display
0% bargraph value 1
100% bargraph value 1
Value 2 display
100
Value 1 display
0% bargraph value 1
100% bargraph value 1
Value 2 display
Value 3 display
0% bargraph value 3
100% bargraph value 3
Value 4 display
Parameter overview with brief description
Prerequisite
A local display is provided.
A local display is provided.
A local display is provided.
A local display is provided.
A local display is provided.
Proline Prosonic Flow I 400 Modbus RS485
Description
Select how measured values
are shown on the display.
Select the measured value that
is shown on the local display.
Enter 0 % value for bar graph
display.
Enter 100 % value for bar
graph display.
Select the measured value that
is shown on the local display.
→  100
→  100
→  100
→  100
→  101
→  101
→  101
→  101
Selection / User Factory setting
entry
• 1 value, max. size 1 value, max. size
• 1 bargraph + 1
value
• 2 values
• 1 value large + 2
values
• 4 values
• Volume flow Volume flow
• Mass flow
• Flow velocity
• Sound velocity
• Temperature
• Density
• Electronics
temperature
*
• Signal strength
• Signal to noise
*
ratio
*
• Acceptance rate
*
• Turbulence
• Totalizer 1
• Totalizer 2
• Totalizer 3
Signed floating-point Country-specific
number
Signed floating-point Depends on country
number and nominal
diameter
For the picklist, see –
Value 1 display
parameter
(→  100)
For the picklist, see
Value 1 display
parameter
(→  100)
Endress+Hauser