Operation; Reading Off The Device Locking Status; Adjusting The Operating Language; Configuring The Display - Endress+Hauser Proline Prosonic Flow I 400 Operating Instructions Manual

Proline Prosonic Flow I 400 Modbus RS485
Endress+Hauser
11

Operation

11.1

Reading off the device locking status

Device active write protection: Locking status parameter
Operation → Locking status
Function scope of the "Locking status" parameter
Options Description
None The access authorization displayed in the Access status display parameter applies
→  55. Only appears on local display.
Hardware locked The DIP switch for hardware locking is activated on the main electronics module.
This locks write access to the parameters (e.g. via local display or operating tool)
→  116.
Temporarily locked Write access to the parameters is temporarily locked on account of internal
processes running in the device (e.g. data upload/download, reset, etc.). Once the
internal processing has been completed, the parameters can be changed once
again.
11.2

Adjusting the operating language

Detailed information:
• To configure the operating language →  74
• For information on the operating languages supported by the measuring device
→  163
11.3

Configuring the display

Detailed information:
• On the basic settings for the local display →  99
• On the advanced settings for the local display →  106
11.4

Reading off measured values

With the Measured values submenu, it is possible to read all the measured values.
Navigation
"Diagnostics" menu → Measured values
‣
Measured values
‣
Process variables
‣
System values
‣
Totalizer
‣
Output values
Operation
→  118
→  119
→  121
→  120
117