Output Values - Endress+Hauser Proline Prosonic Flow I 400 Operating Instructions Manual

Operation
Parameter
Value status input
120
Navigation
"Diagnostics" menu → Measured values → Input values
‣
Input values
Value status input
Parameter overview with brief description
Prerequisite
For the following order code:
"Output; input", option I "4-20mA HART,
2x pul./freq./switch output; status
input"
11.4.4

Output values

The Output values submenu contains all the parameters needed to display the current
measured values for every output.
The parameters displayed depend on:
• The selected device order
• The set operating mode of the pulse/frequency/switch outputs
Navigation
"Diagnostics" menu → Measured values → Output values
‣
Output values
Output current
Measured current
Pulse output
Output frequency
Switch state
Output frequency
Pulse output
Switch state
Proline Prosonic Flow I 400 Modbus RS485
Description
• High
• Low
→  120
User interface
→  121
→  121
→  121
→  121
→  121
→  121
→  121
→  121
Endress+Hauser