Endress+Hauser Proline Prosonic Flow I 400 Operating Instructions Manual page 124

Operation
Parameter
Assign channel 1
Assign channel 2
Assign channel 3
Assign channel 4
124
Assign channel 2
Assign channel 3
Assign channel 4
Logging interval
Clear logging data
Data logging
Logging delay
Data logging control
Data logging status
Entire logging duration
Parameter overview with brief description
Prerequisite
The Extended HistoROM application
package is available.
The Extended HistoROM application
package is available.

The software options currently
enabled are displayed in the
Software option overview
parameter.
The Extended HistoROM application
package is available.

The software options currently
enabled are displayed in the
Software option overview
parameter.
The Extended HistoROM application
package is available.

The software options currently
enabled are displayed in the
Software option overview
parameter.
Proline Prosonic Flow I 400 Modbus RS485
Description
Assign process variable to logging
channel.
Assign a process variable to logging
channel.
Assign a process variable to logging
channel.
Assign a process variable to logging
channel.
→  124
→  124
→  124
→  125
→  125
→  125
→  125
→  125
→  125
→  125
Selection / User entry /
User interface
• Off
• Volume flow
• Mass flow
• Flow velocity
• Sound velocity
• Temperature
• Density
*
• Signal strength
*
• Signal to noise ratio
*
• Acceptance rate
*
• Turbulence
• Electronics temperature
• Current output 1
For the picklist, see Assign
channel 1 parameter
(→  124)
For the picklist, see Assign
channel 1 parameter
(→  124)
For the picklist, see Assign
channel 1 parameter
(→  124)
Endress+Hauser