Table of Contents
Advertisement
Condition
Waiting for DTE The port has been configured and is waiting for the DTE
T1 Status
This field displays the current status of the Quad DSX-1 interface
card. Some conditions are given for each of the four individual
ports, while others apply to the entire card. Possible states are listed
in the following charts:
Condition
Status conditions for an individual DSX-1 port
Off
OK
Red
OOF
Yel
Blue
Tst
61200217L1-1
Description
to issue the appropriate handshaking signals. For the
HSSI interface, the terminal equipment available (TA)
signal must be asserted by the DTE. For V.35, DTR is
required if the TR field is set to
otherwise, DTR is ignored. The TR field is found in the
DTE P
C
ORT
ONFIGURATION
Description
The DSX-1 port has been turned off by the user.
The DSX-1 port is on and is capable of passing data.
The DSX-1 port detects a loss of signal and is in red
alarm.
The DSX-1 port detects an out of frame condition from
the network.
The DSX-1 port detects a yellow alarm condition.
The DSX-1 port detects a blue alarm condition
(unframed all ones).
The DSX-1 port is in test.
T3SU 300 User Manual
Chapter 4. Status
I
W
O
;
DLE
HEN
FF
menu.
4-5
Advertisement
Table of Contents
