Table of Contents
Advertisement
Chapter 3
MENU OPERATION
Only one Telnet session can be active at one time.
61202156L2
Operation
The TDU 120e uses a VT-100 type terminal to display con-
trol and monitor menus. Initiate this mode by keying in
<CTRL> PTT on the terminal once it is connected to the
Control In or Craft port.
When you begin the Telnet session, you will be prompted
for a password. The default password is ADTRAN. You
can change this password using the M
menu.
For detailed information on this method of control, see
the Telnet/Terminal Main Menu on page 3-5.
You can also connect to the TDU 120e via Telnet. Before
attempting to connect via Telnet, first define the IP ad-
dress, the default gateway, and the subnet mask.
See D
U
EFAULT
NIT
page 8-2 for details. The Telnet session will time-out after
a predefined value that is also set in the M
menu.
TDU 120e User Manual
P
in the Unit Access Table on
ASSCODE
sub-
ANAGEMENT
ANAGEMENT
3-1
Advertisement
Table of Contents
