INTRODUCTION
The Total Access 1248 system default provisioning options are shown in
IMA, SNMP, and ATM provisioning, refer to the Installation and Maintenance Practice for the
host Total Access 1248 system.
For detailed information on the Total Access 1248 menus, refer to
Provisioning Option
Password Control
Set Login Name
Access Level
Control Level
Allow SNMP Security
Management
Set Menus Idle Logout
Time
TL1 Menus Logout Time
TL1 Inband Idle Logout
Time
Baud Rate
Current Baud Rate
61179641L5-5C
Section 4
Provisioning Defaults
Table 4-1. Default Provisioning Options
Available Options
User defined
Read Only; Technician; System
Administrator
Read Only; Read/Write
Enabled; Disabled
1–60 minutes
1–120 minutes
1–120 minutes
9600; 19200; 38400 bps
Table
4-1. For T1,
"Section 5, User
Interface".
Default Setting
Not configured
Not configured
Not configured
Disabled
10 minutes
30 minutes
120 minutes
9600 bps
4-1