SNMP Management Options
Trap IP Addresses
Enter up to five IP addresses of SNMP managers to which the
MX2800 sends traps.
Trap Generation
Use this menu (see Figure 3-15) to designate which error conditions
will cause the unit to send trap messages.
Controller Traps
Trap
Protection
Switch
Card Removed
Card Failure
Communica-
tion Fail
Max Switches
61200290L1-1
Figure 3-15. Trap Generation Menu
If enabled, the unit issues a trap when...
the controller cards switch.
a controller card has been removed.
a controller card has failed.
the controller cards can no longer communi-
cate with each other.
the M
S
AX
WITCH
page 3-5.
MX2800 User Manual
Chapter 3. Configuration
T
is reached. See
HRESHOLD
3-19