NETWORK INTERFACE
Select N
parameters (see Figure 3-3). Configure the MX2800 network
settings to match the DS3 signal received from the service provider.
DS3 Configuration
Use the DS3 C
network settings to match your application. Descriptions of these
settings follow:
Framing
Set the framing format to match the format of the receive signal at
the network interface. The MX2800 supports C-
framing formats.
Line Length
Set the line length to reflect the physical length of the DS3 network
line. Set to L
if the distance is less than 50 feet.
61200290L1-1
I
to access the network configuration
ETWORK
NTERFACE
Figure 3-3. Network Configuration Menu
ONFIGURATION
if the cabling distance exceeds 50 feet; set to S
ONG
MX2800 User Manual
Chapter 3. Configuration
selections to configure the DS3
BIT
and M13
HORT
3-3