Frame Relay Configuration Example; Interconnecting Lans Through Frame Relay Network - 3Com MSR 50 Series Configuration Manual

Frame Relay
Configuration
Example
Interconnecting LANs
through Frame Relay
Network
To do...
Display
receiving/sending
statistics information of
frame relay LMI type
messages
Display frame relay data
receiving/sending
statistics information
Display frame relay
permanent virtual
circuit table
Display statistics
information of frame
relay InARP messages
Display the information
of configured frame
relay switching
Display the
configuration of an
X.25 template
Clear all the
automatically
established frame relay
address maps
Clear the statistics on
an FR PVC
This section provides these examples:
"Interconnecting LANs through Frame Relay Network" on page 247
■
"Interconnecting LANs through Dedicated Line" on page 249
■
Network requirements
Interconnect LANs through the public frame relay network. In this implementation,
the routers can only work as user equipment working in the frame relay DTE
mode.

Frame Relay Configuration Example

Use the command...
display fr lmi-info
[ interface interface-type
interface-number ]
display fr statistics
[ interface interface-type
interface-number ]
display fr pvc-info
[ interface interface-type
{ interface-number |
interface-number.subnumber }
] [ dlci-number ]
display fr inarp-info
[ interface interface-type
interface-number ]
display fr dlci-switch
[ interface interface-type
interface-number ]
display x25 template
[ name ]
reset fr inarp
reset fr pvc interface serial
interface-number [ dlci
dlci-number ]
Remarks
Available in any view
Either all the information or the
information of specified interfaces
can be shown. Only main interface
can be specified.
Available in any view
Either all the information or the
information of specified interfaces
can be shown. Only main interface
can be specified.
Available in any view
Either all the information or the
information of specified interfaces
can be shown. The specified
interface can be either main
interface or subinterface.
Available in any view
Either all the information or the
information of specified interfaces
can be shown. Only main interface
can be specified.
Available in any view
Available in any view
Available in user view
Available in user view
247