The Cam List Window; Downloading Profiles To The Xtradrive - YASKAWA XTRAWARE - V3.0 Manual

4. Make any necessary changes to the settings shown and click Print.

4.9.12. The Cam List Window

By default, the Cam List window is displayed on the project screen. If the
window is not displayed, ensure that Cam list is checked in the View menu.
Figure 42: Cam List Window
♦ Download size: Indicates the number of data points that will be
downloaded to the XtraDrive when the Download Cam button is
pressed.
♦ Profile#: The profiles are identified in the Cam List by their numbers.
♦ Download: Check the checkboxes corresponding to all profiles that
should be downloaded to the XtraDrive when the Download Cam button
is pressed.
♦ Size: The number of data points in each profile.
To view or edit a profile:
1. Click anywhere in the row corresponding to the profile number that you
would like to view or edit.
The Electronic Cam window is displayed with the Position Setting tab
displaying the selected profile.

4.9.13. Downloading Profiles to the XtraDrive

A profile is not transferred to the XtraDrive until you download it.
To download a profile:
1. Ensure that the relevant Download checkboxes in the Cam List window
are checked.
2. Click Download Parameters
The profiles are downloaded to the XtraDrive.
Note:
After downloading a profile, the profile is saved in the XtraDrive, but
unlike parameters and programs, which can be uploaded from the
XtraDrive to XtraWare, profiles cannot be uploaded.
Thus, it is important that profiles are saved on a disk for backup
purposes.
XtraWare User Manual
Operating the XtraDrive Using XtraWare
on the toolbar.
61