Viewing The Master-Slave Table - YASKAWA XTRAWARE - V3.0 Manual

4.9.9.

Viewing the Master-Slave Table

The Data List tab displays all the interpolated points through which the
slave will move, listed per segment.
To view the Master-Slave table:
1. Open the Data-List tab.
2. Click on one of the segments listed on the left panel of the Data List tab.
The master-slave table is displayed on the right, listing all of the
interpolated points, as well as the specified start and end points of the
selected segment.
Figure 40: Data List Table
XtraWare User Manual
Operating the XtraDrive Using XtraWare
59