Set_Outputs - YASKAWA XTRAWARE - V3.0 Manual

Command Reference

SET_OUTPUTS

Table explanation
Group
Syntax
Op. Code
Modes
Description
Syntax
Arguments
Example
Example
Explanation
See Also
150
Output
SET_OUTPUTS <output mask> <output state>
107
Program, Immediate, Sequential
Simultaneously sets a group of digital outputs to ON or OFF.
Output mask
Output state
WAIT_VAR Position_actual_value >= 100
SET_OUTPUTS 6 4
END
When the position value equals or exceeds 100 uu, digital output
1 is set to OFF and digital output 2 to ON. <Output mask> is 6
(0110), meaning that only outputs 1 and 2 can be affected.
<Output state> is 4 (0100) and determines the value of the
affected digital outputs.
SET_OUTPUT
Decimal value of a bit string, in which the
digits define which outputs are set and
which are ignored. The rightmost digit of
the string is ignored, the next corresponds
to OUT 1 on pins CN1-25, CN1-26, etc.
Setting
Ignore
Set
Range: 1 to 0x00FFFFFF
Serial 4 U
Decimal value. A bit string represents the
digital outputs to be set. The rightmost
digit is ignored, the next corresponds to
OUT 1 on pins CN1-25, CN1-26, etc.
Range: 1 to 0x00FFFFFF
Serial 4 U
Code
0
1
V
V
XtraWare User Manual