Starting The Trace; Printing A Chart - YASKAWA XTRAWARE - V3.0 Manual

4.7.3.

Starting the Trace

To start a trace:
1. In the Chart main window, click Start Trace
A message Waiting for trigger and data collection completion is
displayed
2. To cancel the trace, click Start Trace
to run the program.
When the conditions are met and the trigger is applied, a message
Uploading data is displayed.
3. Click Cancel if you want to halt the data sampling process, otherwise
wait until the process ends.
The Chart main window is displayed once the specified data has been
obtained.
Notes:
1. Sometimes the trigger cannot be detected in under 2 ms due to
the characteristics of the detection period.
2. If the sampling time is increased, XtraWare may continue to wait
for the trigger even after the trigger has been applied. XtraWare
waits because data for the sampling time is saved in the XtraDrive
after the trigger has been applied.
4.7.4.

Printing a Chart

The chart and data of the Chart main window can be printed.
To print a chart:
1. Select the Print Chart option from the File menu while the chart is
open.
XtraWare User Manual
Operating the XtraDrive Using XtraWare
.
again. Otherwise, click Run
43