Connecting A Strobe Device - Omron F160-2 Setup Manual

Connecting a Strobe Device

Item
Weight Approx. 1 kg
Accessories Four mounting brackets
Memory Cards
F160-N256S
Item
Operating: 0 to 60 °C (with no condensation)
Ambient temperature
Storage: -25 to 85 °C (with no condensation)
range
Ambient humidity 8% to 95% (with no condensation)
range
Ambient environment No corrosive gases
Life expectancy 300,000 overwrite operations
Number of pins 50 pins
Weight Approx. 15 g
5-6

Connecting a Strobe Device

Use the I/O connector's strobe trigger outputs to control the strobe flash tim-
ing. There are two strobe trigger outputs, STGOUT0 and STGOUT1, i.e., one
for each of camera 0 and camera 1.
Refer to page 31 for details.
SeeAlso
Check the strobe device's specifications and set the appropriate "Shutter trig-
ger polarity" and "Shutter trigger width" in the Camera settings (Detail) Menu.
The Camera settings (Detail) window is displayed at startup and can be dis-
played at other times by selecting Camera settings from the System Menu.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specification
42.8
Specification
Section 5-6
Unit: mm
3.3
61