Preparing For Jetcraft Installation - Paradyne CPX-1000 User Manual

Preparing for
JetCraft
Installation
Table 2–1. Hardware Requirements for JetCraft
Hardware
Craft Terminal
RAM
Virtual memory
Storage (hard disk)
CD-ROM drive
Network
June 2005
C
JetCraft Installation
This chapter provides instructions for installing JetCraft.
Preparing the environment for installation (page 2-1)
Installing JetCraft (page 2-2)
Removing JetCraft (page 2-9)
Before installation, make sure that the person performing the
installation has administrator privileges.
JetCraft requires the following:
Workstation running Windows 98/2000 and NT Version 4,
Service Pack 5 or later
Netscape Navigator, Release 4, or later or Internet Explorer,
Release 4.0.1, or later
Table 2–1 lists the hardware requirements for running JetCraft.
Requirements
Pentium class 233 MHz processor or greater
128 MB
256 MB
100 MB free disk space
Accessible
Ethernet NIC
H A P T
2
E R
2-1