Assigning Network Protection Group Members - Paradyne CPX-1000 User Manual

6. Protection Group Provisioning
Assigning
Network
Protection
Group
Members
Step 1
Right-click these fields and select Configure
Step 2
6-2
Note
The gray background indicates that the states (active/
standby) of the card are unknown because the card
corresponding to a member has been removed;
however, the slot/port information continues to display.
Before assigning members to the network protection group, make
sure that the CPX-1000 is up with redundant ATM cards (OC-3 or
DS-3).
To assign members to the network Protection Group:
Click Network PG on the Tree View, the right-hand pane
changes to the network Protection Group tabular view
(Figure 6–1).
Figure 6–1. Network Protection Group Tabular View
Select a protection group to which you want to assign member.
1000-A2-GB22-10
June 2005