Paradyne CPX-1000 User Manual page 216

12. Integrated Monitoring
Table 12–2.CPX-1000 Connection Status Parameters
Parameter Interface Group
X Indicating the DS1
number.
Y Indicating the card
number on which the
DS1 is provisioned.
Z Indicating the port/
channel* number to
which the DS1 is
connected.
* channel is a logical identifier in a STS-1 link.
Table 12–3.Integrated Monitor Color Indicators
Entities Active State (Green)
Interface Operational state: Up
Groups
Standby state: Active
The CPX-1000 is
transmitting/receiving
EOC/TMC messages
from the Class 5 switch
on this link.
Network Operational state: Up
Protection
Standby state: Active
Group
The network link is
functioning.
PSTN Operational state: Up
Protection
Standby state: Active
Group
The provisioned link is
functioning.
12-4
Network Protection
Group
Not applicable
Indicating the card
number to which the
Network link is
connected.
Indicating the port
number of the
Network link.
Standby State (Blue)
Operational state: Up
Standby state: Standby
The CPX-1000 is
transmitting/receiving
EOC/TMC messages
from the Class 5 switch
on this link if the active
link fails.
Operational state: Up
Standby state: Standby
The network link is up
but kept as standby to
the active link.
Operational state: Up
Standby state: Standby
The provisioned link is
up but kept as standby
to the active link.
1000-A2-GB22-10
PSTN Protection Group
Not applicable
Indicating the card
number to which the
STS-1 link is connected.
Indicating the port
number of the STS-1 link.
Connection State (Gray)
Operational state: Down
Standby state: Active/
Standby
The CPX-1000 is not
transmitting/receiving
EOC/TMC messages
from the Class 5 switch
on this link.
Operational state: Down
Standby state: Active/
Standby
The network link is
down.
Operational state: Down
Standby state: Active/
Standby
The provisioned link is
down.
June 2005