Paradyne CPX-1000 User Manual page 27

1000-A2-GB22-10
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
June 2005
Note
Ensure that the craft terminal (PC) and CPX-1000 are on
the same subnet.
To start the JetCraft application:
Change the IP address of the craft terminal to match that of
CPX-1000 (Network Neighborhood > TCP/IP tab), but increase the
last digit by one bit. For example, if the IP address of the CPX-1000
is 10.153.145.128, then enter 10.153.145.128.
Change the subnet mask of the craft terminal to match that of
CPX-1000.
Reboot and restart the craft terminal.
Double-click the JetCraft icon on your desktop. The Login dialog
box appears, displaying the default IP address
Figure 2–8. JetCraft Login Dialog Box
Type the IP address of the CPX-1000 to which you are logging in
the CPX IP field.
Note
Once the IP address is entered, you don't have to type it
again until you change the CPX-1000 IP address. You
can use the drop-down list to select the IP addresses.
Type cpxuser (default user ID) in the User Id field.
Type cpxuser (default password) in the Password field.
2. JetCraft Installation
(Figure 2–8).
2-7