1000-A2-GB22-10
Configuring PPS
Settings
Step 1
Step 2
June 2005
The Path Protection Switchover (PPS) capability enables you to
determine which channel (i..e, EOC and TMC) that you do not
want switched.
To configure the PPS settings:
Click the + key next to
– Or –
Click
on the Tree View, the right-hand pane changes to the
Interface Group tabular view
Figure 7–28. Tabular View with Interface Groups
Displayed
Select the name of the Interface Group that you want to switch.
on the Tree View to expand the tree.
(Figure
7–25).
7. Interface Groups
7-31